Krix Tryptix - Manual (Page 3)

specifi cations
amplifi er and speaker power ratings
Krix speakers come with a maximum power
rating. The rating gives you a guide to match
the appropriate amplifi er with your speakers.
When the input level to the amplifi er is very
high, as with CD/DVD players, maximum
output power is reached on the amplifi er
before the volume dial is at maximum. When
using a CD/DVD player, maximum output
power can be at approximately 12 o’clock on
the volume dial. Amplifi ers with the volume
level shown on a digital display make it hard to
judge when maximum power is reached. As a
guide, we suggest that you do not exceed zero
on the digital display.
Turning the volume dial past the amplifi er’s
maximum output power will create distortion
(clipping) (see fi gure 1). Inputting a distorted
signal into your speakers over a prolonged
period will damage them. You can damage
a 200 Watt speaker with a 50 Watt/channel
amplifi er delivering a distorted signal just as
easily as you can damage a 50 Watt speaker
with a 200 Watt/channel amplifi er delivering
too much power. Running an amplifi er at
very high volume over a prolonged period can
even damage a compatible speaker/amplifi er
combination. For more information contact
your authorised Krix dealer or visit krix.com.
'JHVSF



.BYJNVN

"NQMJ±
FS

0VUQVU

.BYJNVN

"NQMJ±
FS

0VUQVU

EJTUPSUJPO
DMJQQJOH

XJMM
PDDVS
XIFO

NBYJNVN
PVUQVU
JT
FYDFFEFE
PVUQVU
BU

MPX
MFWFM
PVUQVU
BU

GVMM
QPXFS
4BGF
BSFB
"SFB
JO
XIJDI
EJTUPSUJPO
PDDVST
Frequency Range 65Hz - 40kHz in room response
Power Handling Maximum 100 watts RMS amplifi er power into 4ohms
Sensitivity 88dB for 2.83 volts at 1 metre
Confi guration Point source dual 4 inch 2-way
Bass Drivers 2 x nominal 100mm (4”) doped paper cones. 25mm (1”) voice coil
wound on high powered aluminium former provides good linearity
and driver control at large cone excursion
Tweeter 26mm (1”), dual concentric diaphragm with wave-guide centre plug
for controlled directivity. Non-refl ective dual chambered magnet
structure for lower distortion
Crossover Point 1.75kHz
Impedance Nominally 4 ohms
Enclosure Type Bass refl ex front vented
Dimensions 550mm high x 136mm wide x 118mm deep
Material 5mm ABS, internally braced
Finish Laquered high gloss paint
Volume 5 litres internal
Weight 3.5kg each
3