LA Audio BCL20 - Manual (Page 15)

14
6 SPECIFICATIONS 6 SPECIFICATIONS
Frequency Response Frequency Response
20 Hz to 20 kHz +/- 0.5dB
Signal to Noise Ratio Signal to Noise Ratio
+ 4 dBu Input, + 4 dBu Output -94 dB
Input Impedance Input Impedance 20k Ohms balanced
Output Source Impedance Output Source Impedance 20 Ohms
Output Load Impedance Output Load Impedance 600 Ohms to infinity
Maximum Input Level Maximum Input Level + 20 dBu
Maximum output Level Maximum output Level 600 Ohms Load, 1 kHz + 20 dBu
Total Harmonic Distortion Total Harmonic Distortion (THD)
+ 4 dBu Output,
1 kHz, 10 dB compression
0.07 %
1 kHz, by-pass 0.01 %
Intermodulation Distortion Intermodulation Distortion 0.01 %
Compression Ratio Compression Ratio
Continously variable
from 2 : 1 to 20 : 1
Attack Time (Peak) Attack Time (Peak)
Continously variable from 0.1 to 70 millisec.
Release Time (Peak) Release Time (Peak)
Continously variable from 100 millisec to 3 sec.
Attack Time (RMS) Attack Time (RMS)
Program dependant Typ. 12 ms for 12 dB.
Typ. 4 ms for 24 dB.
Release Time (RMS) Release Time (RMS)
Program dependant
Typ. 120 ms for 12 dB
Typ. 240 ms for 24 dB
Mains power Consumption Mains power Consumption
(115/220 VAC, 50-60 Hz) 6 Volts-amps
Meter Calibration Meter Calibration 0 Vu = + 4 dBu
Maximum Gain Reduction Maximum Gain Reduction more than 50 dB