LA Audio DLX200 - Manual (Page 18)

18
Utilities
UTILITY FUNCTIONS
Two utility pages are provided to adjust infrequently used settings. These can be found by pressing
the channel buttons until you pass the last output or before input 1.
DLX 260
F1 F3 F2
Util Screen ParaEQ
1.. 100% BW=Q
F1 F2
Utility page 1 sets system-wide display parameters. Screen contrast allows you to adjust the display
for different viewing angles. Parametric EQ bandwidths can be set to display in as ‘Q’ values, or in
octaves.
DLX 260
F1 F3 F2
Util Mode
..2 Mono
F1
Utility page 2 sets the current format to mono or stereo.
Care should be taken when swapping between mono and stereo mode as the parameter set for
the left-hand channels will be copied to, and overwrite the right-hand settings. This is not reversible
and could be a real pain if you’ve just spent ages setting up the right side of your system! For more
information on formats, see page 12.