Approvals, Warnings, Explanation of graphical symbols – Lab.gruppen fP 2400Q User Manual
Page 3: Warning, Caution, Important safety instructions, O= =^mmols^ip, P= t^okfkdp, Pkn= bñéä~е~нбзе=зс=цк~йьбе~д=лугдздл, Pko= t^okfkd
O= =^mmols^ip=
pproved according to
L made
is recognized by local
(AHJs)
This equipment is tested and a
the U.S. safety standard ANSI/ UL 6500 and
Canadian safety standard CSA E60065-00. ET
the tests and they are a Nationally Recognized Testing
Laboratory (NRTL).
The ETL Listed Mark
inspectors and Authorities Having Jurisdiction
throughout North America and also in some areas of South America. ITS ETL SEMKO is a NRTL
recognized by OSHA (Occupational Safety and Health Administration
)
, the ETL Listed Mark is an
accepted alternative to UL and, as such, inspectors and AHJs are required by law to recognize,
acknowledge, and accept the mark as proof of product compliance. See more on ETL Web:
www.etlsemko.com/S1OurMarks/index.htm
P= t^okfkdp=
PKN= bñéä~е~нбзе=зС=Цк~йЬбЕ~д=лугДздл=
The lightning symbol within a triangle is
intended to alert the user to the
presence of un-insulated “dangerous voltage”
within the amplifier’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to humans.
The exclamation point within a triangle is
intended to alert the user to presence of
important operating and service instructions in
the literature accompanying the product.
!
PKO= t^okfkd==
To reduce risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
PKP= `^rqflk=
To reduce the risk of fire or electric shock, do
not remove screws. No user-serviceable parts
inside. Refer servicing to qualified service
personnel.
PKQ= fãéçêí~åí=p~СЙну=fåëíêìÅíáçåë=
Before using your amplifier, be sure to carefully read the applicable items of these operating
instructions and the safety suggestions
1. Keep this manual for future reference.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this unit near water. Do not spill water or other liquids into or on the unit. Do not
operate the amplifier while wet or standing in liquid.
5. Clean only with dry cloth.
6. Do not block the air intake or exhaust ports. Install the unit in accordance with the instructions.
!
7. Do not operate the amplifier near heat producing devices such as radiators, heat registers, stoves
or other apparatus that produce heat.
8. Always operate the unit with the chassis ground wire connected to the electrical safety earth. Do
not defeat the safety purpose of a grounding-type plug. A grounding type plug has two pins and
a third grounding prong. The third prong is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Connect only to AC power outlets rated 100-120V, 50-60Hz.
i~ÄKÖêìééÉå== =
=
=
=
======================
========================
O
rëÉê=j~ем~д===Сm=OQMMnLNNR=====sÉêëáçå=MKT========OMMPJMOJOR=