Labconco Biological Safety Cabinets 34608 Series - Manual (Page 65)

Appendix D: Accessories
Product Service 1-800-522-7658 60
*Postfilter Conversion Kit
These kits allow the retrofitting of carbon postfilters in Logic cabinets that
originally did not have this option.
Catalog # For use with Shipping
Weight
3859301 All 4-foot Purifier Logic Series 5 lbs. (2.3 kg)
3859302 All 5-foot Purifier Logic Series 5 lbs. (2.3 kg)
3859303 All 6-foot Purifier Logic Series 5 lbs. (2.3 kg)
*Canopy Connection Kit
Contains the transition for thimble ducting the Biosafety Cabinet Logic
Series Cabinets to a 10-inch diameter stainless steel duct.
Catalog # For use with Duct Dia. Shipping Weight
3858700 3-foot Purifier Logic Series 10" 15 lbs. (7 kg)
3858701 4-foot Purifier Logic Series 10" 15 lbs. (7 kg)
3858702 5-foot Purifier Logic Series 10" 15 lbs. (7 kg)
3858703 6-foot Purifier Logic Series 10" 15 lbs. (7 kg)
*Air-Tight Damper (# 3776800)
The 10-inch diameter stainless steel damper mounts atop the Canopy
Connection Kit to adjust exhaust airflow. Shipping weight 13.0 lbs. (5.9 kg).
NOTE: This damper IS NOT prepared for the installation of the canopy
alarm sensor. If you want a canopy airflow sensor, order #3859700, listed
below.
*Air-Tight Damper with Canopy Alarm Sensor
(# 3859700)
This damper with integral canopy airflow sensor mounts atop the Canopy
Connection Kit to adjust exhaust airflow. Includes wiring harness to connect
with the Logic Control board. Shipping weight 13.0 lbs. (5.9 kg).
*Backdraft Damper (# 3858800)
The backdraft damper mounts in a vertical run of duct to prevent the reverse
pressurization of the exhaust system. Sized for 10-inch diameter ductwork.
Shipping weight 5.0 lbs. (2.3 kg).