Labconco Paramoun Ductless Enclosures 69636 Series, 6' Widths - Manual (Page 13)

Chapter 3: Getting Started
Product Service 1-800-522-7658 8
Unpacking the Enclosure
We recommend that you do not remove the enclosure from its shipping
container until it is ready to be placed into its final location. Move the unit
by placing a flat, low dolly under the shipping skid, or by using a floor jack.
Carefully remove the shrink-wrap or carton on the enclosure and inspect it
for damage that may have occurred in transit. If damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
Note: The United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of delivery.
Note: Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.
Note: If the enclosure was damaged in transit, you must file a claim directly
with the freight carrier. Labconco Corporation and its dealers are not
responsible for shipping damages.
Do not discard the packing material until you have checked all of the
components and tested the enclosure.
Do not move the enclosure by tilting it onto a hand truck.
Set Up the Ductless Enclosure on a Supporting
Structure and Work Surface
When installing the enclosure onto a chemical-resistant work surface or
benchtop, ensure that the structure can safely support the combined weight of
the enclosure and any related equipment. See Chapter 7: Accessorizing the
Paramount Ductless Enclosure for appropriate work surfaces, stands,
and cabinets. The work surface should be at least as wide as the enclosure
to properly support it. The front of the enclosure should be aligned within
0.3" of the front of the work surface as shown in Figure 3-1. Mounting holes
are provided in the Labconco accessory work surfaces to secure the
enclosure. RTV Silicone sealant can be applied to seal the work surface to
the enclosure.
Work Surface Specifications
The work surface should be smooth, rigid, and durable. The surface should
be non-porous and resistant to the powders, solvents and chemicals used in
conjunction with the Paramount Ductless Enclosure.