Labconco Fiberglass 30 Laboratory Fume Hoods 3030005 - Manual (Page 29)

25
Product Service 1-800-522-7658
Chapter 4: Performance Features and Safety Precautions
The use of heat-generating
equipment in this hood without the
exhaust system operating properly
can cause damage to the hood.
The Fiberglass 30 Laboratory
Hood should be certified by a
qualified certification technician
before it is initially used. The
hood should be re-certified
whenever it is relocated, serviced
or at least annually thereafter.
Ensure that the unit is connected
to electrical service in accordance
with local and national electrical
codes. Failure to do so may create
a fire or electrical hazard. Do not
remove or service any electrical
components without first
disconnecting the hood from
electrical service.
Proper operation of the fume hood
depends largely upon the hood’s
location and the operator’s work
habits. Consult the Reference
Manual in Appendix D.
Your Next Step
After you understand the theory of operation and safety
precautions, you are ready to proceed to Chapter 5:
Using Your Fiberglass 30 Fume Hood.
!