Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 - Manual (Page 41)

37
Product Service 1-800-522-7658
Chapter 4: Performance Features and Safety Precautions
AVOID CROSS DRAFTS AND
LIMIT TRAFFIC IN FRONT OF
THE HOOD. AIR
DISTURBANCES CREATED
MAY DRAW FUMES OUT OF
THE HOOD.
The use of heat generating
equipment in this hood without the
exhaust system operating properly
can cause damage to the hood.
The Protector XL Floor-Mounted
Hood should be certified by a
qualified certification technician
before it is initially used. The
hood should be re-certified
whenever it is relocated, serviced
or at least annually thereafter.
Ensure that the unit is connected
to electrical service in accordance
with local and national electrical
codes. Failure to do so may create
a fire or electrical hazard. Do not
remove or service any electrical
components without first
disconnecting the hood from
electrical service.
Proper operation of the fume hood
depends largely upon the hood’s
location and the operator’s work
habits. Consult the Reference
Manual in Appendix D.
Your Next Step
After you understand the theory of operation and safety
precautions, you are ready to proceed to Chapter 5:
Using Your Protector Fume Hood.
)
!