Labconco FreeZone 1 Liter Benchtop Freeze Dry Systems 7740071 User Manual
Page 11
7
Product Service: Domestic 1-800-522-7658, International 816-333-8811
C
C
H
H
A
A
P
P
T
T
E
E
R
R
2
2
P
P
R
R
E
E
R
R
E
E
Q
Q
U
U
I
I
S
S
I
I
T
T
E
E
S
S
Before you install your Freeze Dryer, you need to prepare your site
for installation. Carefully examine the location where you intend
to install your Freeze Dryer. You must be certain that the area is
level and of solid construction. An electrical source must be
located near the installation site.
Carefully read this chapter to learn:
• the electrical supply requirements.
• the vacuum pump requirements.
Refer to Appendix C: Freeze Dryer Specifications for complete
Freeze Dryer electrical and environmental conditions,
specifications and requirements.
Electrical Requirements
The Freeze Dryer requires a dedicated electrical outlet. This outlet
requires a 20 Amp circuit breaker or fuse for models rated at 115V
(60 Hz). An outlet equipped with a 15 Amp circuit breaker or fuse
is required for models rated at 230V (50/60 Hz). The power cord
on 115V models are equipped with a 20 Amp NEMA 5-20P plug.
Various power cord configurations are provided with 230V
models. If this does not match the available receptacle, remove
this plug and replace it with an approved plug of the suitable style.