Installing right and left im thigh skins, Setup for simulation – Laerdal SimMan 3G Mystic User Manual
Page 37
33
34
Manikin Setup
System Setup
Setup f
or Sim
ulation
Clinical F
eatur
es
Maintenance
Tr
oubleshooting
Spar
e Par
ts
Setup for Simulation
4 Connect the blood tubing to the blood port located on the
manikin's right side.
Installing Right and Left IM
Thigh Skins
1
The dorsal side of each IM Thigh Skin is marked by either an "L"
or "R". This marking should be aligned with the corresponding "L"
or "R" on the upper dorsal thigh of the 3G manikin's leg.
2 Apply a liberal amount of baby powder to the inside of the skin
and leg and pull the skin all the way up until it is even with the top
of the leg skin.
3 Fold the skin half way down and carefully insert the Foam IM Pad
underneath the skin. The Foam IM Pad could tear if mishandled.
4 The Foam IM Pad should sit 1" (2.5 cm) from the top edge of the
leg. Replace the skin.
3.