LG Motorsports LG Pro Long Tube Headers User Manual
Page 9
Figure 16: install of X pipe onto S pipes.
Figure 17: Rear mid section installed into rear hangers.
Once you have the entire mid section installed and loosely tightened into place it is now
time for a decision. If you have the LG high flow 3” mufflers then you can simply slide
over your next pair of 3” clamps, install the mufflers, align and tighten all of your clamps
working you way rear to front. If you want to re-use your stock mufflers you need to
measure and cut the factory mufflers from your stock system and use the supplied
adapters to install. If you have an aftermarket system that is 2.5” then use the adapters,
and install just like you did on your stock system. Align your mufflers first and work
your way forward on tightening the clamps.