LG Motorsports LG C6 World Challenge Hood - Manual (Page 2)

9. At this point you can install the latch hardware. If you need to align the hood more, the
latch mount on the inner fender has plenty of adjustability. We rarely need to adjust this.
10. Install two bump stops, and set rear corners flush with fenders.
Notes : Our hoods are double primed. They are prepped, primed in grey, prepped
again, and the final coated in then in black. This is the same primer just different colors.
The advantage is it will help guide the body shop. We recommend simply scuffing the
hoods and re-priming using the primer that is recommended by the paint supplier, this is
done to insure a proper adhesion between the layers. The multiple color black/grey will
insure the body shop does not break trough the surfaces. If they do sand trough the black
coat they will run into a grey coat, this should alarm them not to go farther. The primer is
what seals the substrate, the more they sand away the less the protection.
Lou Gigliotti
President LG Motorsports
LG Motorsports is not responsible for any improper install, modification to product, or
any changes made by installer to product. Any welding or modification will void any
product warrantee. LG Motorsports or the dealer is not liable for any loss, damage, or
injury due to the direct or indirect use of this product.