Lingenfelter L250150309 Lingenfelter 10 bolt Supercharger Pulley Hub v1.1 User Manual
Page 5
Advertising
Page 4.
9. Place the 3/16” x 1” LPE dowel pin (part
# 98381A510
)
into the hole that was just drilled
out.
10. Secure the front cover and supercharger
pulley. Using a hammer and punch, hit the two
surfaces around the pin shown to the left. This
will keep the dowel pin securely in place.
11. Reinstall the black cap onto the front of the
hub.
12. Install the supercharger pulley onto the 10
bolt hub.
Advertising