Lingenfelter L650050704 Lingenfelter Cadillac CTS-V Airbox 2004-2007 v3.1 User Manual
Page 3
Before you begin
- Read instructions completely before starting each step.
- Pay attention to how parts are removed from the vehicle and make sure to keep track of all parts, in
many cases they may be used in the installation.
Step 1. Radiator shroud removal
- Remove the plastic radiator shroud by removing the two plastic rivets with a flat blade screw driver or
pry tool. To do this you must first unlock the rivet by prying up on the head of the rivet, located at the
center (the head will raise about a half an inch).
- Once the rivet has been unlocked it can then be removed.
- There are two push-lock style fasteners at each edge of the plastic shroud. These are removed by
inserting your flat blade screw driver/pry tool near the fastener and gently prying upward.
Page 2 of 11
CAUTION:
Be very careful when handling the Mass
Air Flow (MAF) sensor. Do not dent, puncture or
otherwise damage the Honeycell located at the air inlet
end of the MAF. Do not touch the sensing elements
or allow anything (including cleaning solvents and
lubricants) to come in contact with them. Do not drop
or roughly handle the MAF.