Lingenfelter L710111005 Trailblazer SS & SSR E85 High Flow Fuel Pump Upgrade Kit v1.5 - Manual (Page 9)

31. Connect the other end of the fuel pump
harness to the connector attached to the fuel
pump.
NOTE: Make sure the wires are routed so that
they can move freely and won’t interfere with the
float operation.
Congratulations, you have completed installation of the Lingenfelter
SSR and Trailblazer High Flow Fuel Pump Kit
32. Install the fuel pump module per OEM
instructions.
Page 8 of 9
Stock Trailblazer SS module vs LPE High Flow TBSS module, PN L710101108
test at 13.4 vdc
(knee point in graph is where fuel pressure regulator opens)
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400 450 500
Pressure (kPa)
F
lo
w
(l
p
h
)
stock 13.4 Fuel_Flow (lph)
LPE 13.4 Fuel_Flow (lph)
NOTE: This graph does not just represent the flow of the fuel pump itself, but rather the flow of the entire module including filter
restriction and flow consumed by the internal jet pump.