Lingenfelter L650162012 Lingenfelter Camaro ZL1 Air Intake Kit 2012-13 v1.1 - Manual (Page 2)

Page 1.
Parts List
2012 Camaro ZL1 Air Intake Kit (PN: L650162012)
# Description Part number
1 duct, ZL1 Camaro XX05312-0003
1 Rotofab Camaro air intake kit, partial 10151019
1 ground bolt 11588712
1 4” hump hose XX05312-0002
1 45 deg nipple connector 25862741
1 Lingenfelter vinyl decal for airbox LPE_7”SIL DECAL
1 Lingenfelter decal L920010000
8 Instructions N/A
Tools & Materials Required
Optional Items
• Ratchet
• 7mm socket
• 8mm socket
# Description Part number
1 Polished duct SPP-9769
1 4” hump hose TF01-476-BK
• 10mm socket
• 10mm deep socket
• Phillips head screwdriver
1. Open the hood. If you have been driving
your vehicle, allow a couple hours for the engine
to cool down before beginning installation.
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.
Torque value warning - the torque values for the fasteners are provided in metric (Nm) and
then imperial units. For the imperial units some are referenced in lb-ft and others in lb-in. Make
sure you notice the difference and set your torque wrench correctly.
WARNING: Installation of this kit requires the power steering ground stud to be
removed and replaced with a ground bolt in order to create enough clearance for the
installation of the air filter. Make sure that the power steering ground wire is securely
fastened to the vehicle by the ground bolt. The power steering system, which is
grounded through this wire, is capable of pulling enough current to disable the entire
vehicle if the ground path gets interrupted.