LINK Systems OmniLink 5000 - Manual (Page 14)

2-9
2.3 contains 15 names. The other names can be accessed by pressing the NEXT GROUP softkey
or using the arrow keys and moving the cursor past the first or last name.
To select a name fro the list of 45 names, position the cursor to the name that is to be selected and
press the ENT key.
If the desired name does not appear, either one of the existing names can be changed or a unused
location programmed with the desired name. To edit or add a name, move the cursor to the location
for the new name and press the change name softkey. The alphanumeric text edit box will appear.
This is shown in Figure 2.4. Letters are selected by using the left and right arrow keys to position
the letter pointer under the desired letter, then pressing the SELECT LETTER softkey. If the left
or right arrow key is pressed and held, the pointer will automatically move to successive letters.
Upper or lower case letters can be selected by the LOWER CASE/UPPER CASE softkey. If upper
case letters are currently being displayed in the text box, pressing the LOWER CASE softkey will
change the text box to lower case letters. To change a previous entered character, use the CURSOR
LEFT and CURSOR RIGHT softkeys to position the data entry line cursor over the letter to be
changed and then select the new character. A space is inserted each time the SPACE softkey is
pressed, and the CLR key clears all characters that have been entered. Numbers are entered directly
from the numeric keypad. The entry process is aborted if the ABORT EDIT softkey is pressed,
leaving the previous data intact. The new description is accepted when the ENT key is pressed.
Figure 2.4 Alphanumeric Data Entry
If it is decided to assign no name to the select channel, press the NO NAME softkey.
The EXIT softkey will return the display to the Die Protection menu.