Section 12 – specifications – Lumagen Radiance 2144/2124 User Manual
Page 46
Section 12 – Specifications
Copyright 2009-2014 Lumagen, Inc.
Radiance 2124 and 2144, Rev 051514
38
Section 12 – Specifications
Inputs
• 8 HDMI
®
1.4a with 3D at up to 1080p60
• 2 Component inputs (RGsB/RGBcvS/S-Video) up to 720p60, 1080i30 or 1280x1024x60 for PC modes.
• 2 Composite Inputs NTSC, PAL and SECAM
• 2 Stereo Analog Audio Inputs
• 1 Optical Digital Audio Input
• 3 COAX Digital Audio Inputs
Processing
• Proprietary Lumagen No-Ring™ scaling
• Darbee Digital Visual Presence™ (DVP™) enhancement technology
• 10-bit processing for deinterlacing plus a 12-bit calibration pipeline
• Support for HDMI
®
1.4 “3D” including anamorphic lens scaling
• Convert common optional 3D formats to a required format support by the display
• Each input has 4 user configuration memories
• Each input user configuration memory has 8 resolution sub-memories (for HD inputs)
• Each resolution sub-memory is linked to one of 8 output configurations.
• 2:2, 3:2 and 3:3 pull-down for SD/HD film sources
• Per-pixel SD/HD video de-interlacing
• Adaptive diagonal filtering
• MPEG mosquito and block artifact reduction
• Temporal noise reduction for SD and HD sources
• User programmable non-linear-stretch (NLS) mode
• 4:3, LBOX, 16:9, 1.85, 2.35, 2.40 and NLS input aspect ratios
• Programmable output aspect ratio from 1.10 to 2.50
• Extensive support for anamorphic lenses for both 2D and 3D video
• Large suite of test patterns
• Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette
• 21-point parametric grayscale and Gamma calibration
• Programmable input/output color-space
• Y/C-delay calibration
• CUE and ICP filtering
Outputs
• Output resolution from 480p to 1080p60 (2124) or up to 4k60 8-bit 4:2:0 for 2144, plus 1080i
• 2 HDMI 1.4a, with 3D
• Maximum output rate of 1080p60 for Radiance 2124, and for Radiance 2144 it is 4k60 (output 2 only)
• Eight channel audio at 192 kHz
• Supports DD True-HD™, and DTS Master Audio™ bitstream formats
• HDMI outputs can provide (5V at 50 mA max per HDMI specification) “stand-by” power to display
• 1 Digital COAX audio output
Miscellaneous
• IR and RS232 control input (See Tech Tip 11 and 12 on th
website)
• Wired IR format command input
• USB control input
• Universal, 100-240V, ~50/60Hz external 12 VDC power supply
• Power consumption: 25 Watts including external power supply
• Optional rack mounting ear