Luxul XAP-1500 - Manual (Page 9)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9
Parameter: Default Value
Default IP address: 192.168.0.16
Default user name: admin
Default password: admin
The Luxul XAP-1500 default IP addresss is 192.168.0.16. If the IP address of your router
is not set to the 192.168.0.X network, a temporary static IP address must be set
on the computer being used for configuration. To do so, set the IP address of the
computer to the 192.168.0.X range and then use the default IP address of your XAP-
1500 as the Gateway/Router. Once configured, set the computer IP configuration
back to “Obtain Automatically/DHCP.”
NOTE: Go to http://luxul.com/how-to-videos for videos about
changing the IP address of your Operating System.
Connect a Client Device
„
Connecting a Wireless Client Device: Connect the client device to one of the
XAP-1500 default wireless networks (
Luxul1500_24 or Luxul1500_5X). Both
Wireless networks will run in Open Security mode. A passphrase is not required
until Wireless Security is configured.
„
Connecting an Ethernet Device: Use Ethernet cable to connect your computer
or device to one of the XAP-1500 LAN ports.
NOTE: Only devices that support 5GHz will see Luxul1500_5X wireless
network.
Login
Login to the XAP-1500 with the following steps:
1. Open a Web browser, and enter 192.168.0.16. The access point login screen
will appear.
2. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the access point
configuration interface.
ADVANCED SETTINGS
For advanced settings information go to luxul.com