Luxul XAP-1500 - Manual (Page 11)

11
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
XAP-1500 Side LEDs
5 CONFIGURATION
5.1 Login
To confi gure the XAP-1500 enter the IP address of the AP into a browser. For your
computer to fi nd the AP, it must be on the same subnet as the AP. The default address
for the XAP-1500 is 192.168.0.16. If connected to a Luxul router, the XAP-1500 will be on
the correct subnet address. If your computer is on a different subnet, it may need to be
manually confi gured to be on the 192.168.0.xx network.
The table below lists the default parameters of the XAP-1500.
Parameter: Default Value
Default IP address: 192.168.0.16
Default user name: admin
Default password: admin
Login to the XAP-1500 Wireless Access Point with the following steps: 1) Be sure the
XAP-1500 is properly installed and powered on 2) Open your Web Browser, and enter
http://192.168.0.16.
The login window appears as shown below:
3) Enter the user name and password (default user name is ”admin” and default pass-
word is “admin”), and then click “OK” to login to the Quick Setup window.