Luxul XAP-1210 - Manual (Page 5)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
Ceiling and Wall Mounting
The XAP-1210 comes with a square mounting bracket to mount it to the wall or
ceiling. Use the Mounting Pattern (Page 6-7) for mounting bracket alignment.
XAP-1210 mounted on a ceiling XAP-1210 mounted on a wall
Desktop Installation
Place on any fl at surface
XAP-1210 on a desktop or fl at surface
Connecting the Ethernet Cable
With the XAP-1210 properly mounted, you can now plug the Ethernet Cable into
the RJ-45 connector.
NOTE: Category-5, super Category-5 or Category-6 unshielded twisted
pair (CAT5/CAT5e/CAT6 UTP) cables can be used. For best
results, it is recommended that Category-6 shielded twisted pair
be used to ensure stable data transmission at highest data rates.