Luxul AGS-1016 - Manual (Page 6)

Quick Install Guide AGS-1016
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-AGS-1016 029151020
6
AGS-1016 INSTALLATION
Installing the AGS-1016 in a Rack
The AGS-1016 can easily be installed in a standard 19” rack. The AGS-1016 includes two
mounting ears for installing and stabilizing the switch. When attaching the mounting
ears and installing the switch within a rack, please refer to the following illustration:
Rack-Mounting the AGS-1016
„
Using the included screws, attach the mounting ears to each side of the switch.
„
Mount the switch in the rack with the LEDs facing outwards. Be sure the switch is
level and properly secured within the rack.
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the AGS-1016.
Attaching the Rubber Feet to the AGS-1016
Connecting Devices
Use standard Ethernet CAT5, CAT5e, or CAT6 cable to connect the AGS-1016 to
a device as described below (CAT6 must be used in order to achieve full Gigabit
bandwidth). The AGS-1016 will automatically adjust to the characteristics (speed/
duplex) of the device to which it is connected.