Martin Archery Martin Compound Bow - Manual (Page 11)

Mod
Settings
Bushing
Boss
Cable Anchor
Cable Guide
11
Furious & Furious-X Cams
Your Furious and Furious-X Cam System utilizes a series of two (2) different rotating
draw length modules, sizes S (small) and L (large). Draw Length positions are numbered
1 (shortest) thru 4 (longest), and are positioned to provide draw length adjustments in 1/2“
increments. See your local dealer or visit www.martinarchery.com for details on your correct
module size and position.
Parts of the Furious and Furious-X Cams
Converting To The X-Shoot Through System
The Furious-X system eliminates the cable guard and the pressures it creates.
Converting your Furious System to the X Shoot-Through System is very easy. All you need
to do is order a conversion kit from your dealer and it will come with X-Modules, cables, long
mod screws, and long axles. Your dealer can easily add the second module to the top and
bottom and then slide in the long axles with the use of a bow press. Install the four cables
and presto! You have a Furious-X system.
Changing The Furious Draw Length
Your Furious Cam may be an X Shoot-Through
system or a standard system, but the draw is
adjusted basically the same. The threaded module
has numbers and dashes on it that indicate what
setting you are on while you are adjusting it. The
dashes signal 1/2" draw increments. When you are
adjusting the draw, make sure that both modules
are in the same setting. To rotate the modules, you
will need to remove the mod screw closest to the
Cable Guide and loosen the module screw that is
closest to the axel. Slide the module to the desired
position and replace and tighten the screws in the
appropriate positions. The modules provide a
longer draw as the module number gets higher.
Shooting
String Anchor
Module
Module Screws
Bushing
Base Cam
Furious-X Furious
Extended Module
Screws
X-Module
X-Module Cable Anchor
Cable Anchor Module Side
Cable Guide