Morel SoundWal X Series - Manual (Page 3)

7 8 Connect speaker to the frame with original
supplied screws
Align speaker to frame
Marking the wall bracket location using the cardboard
template(make sure there is no stud at the back of the
drywall)
2 1 Cut the wall gently
10 11
5 Use screw driver to secure
rame in the wall
4 6 connet the cable to speaker inputs
( + ) to ( + ) and (-) to (-)
3 Insert the speaker frame into the wall
SoundWall
TM
Installation
9 Set the high frequency output level.
(Available only in M/H)
+3
-3
0dB
(
-
) ( + )