Mossberg Silver Reserve Serie Side/Side - Manual (Page 7)

5
While holding the stock/receiver assembly, push the top lever fully to the right
(Fig. 3c). Swing the barrels fully up and release the top lever. The lever will return
to a centered position. The barreled action is now ready to receive the forearm.
To install the forearm to the barreled action, mate the rounded surfaces of the
forearm plate to the receiver (Fig. 4a). Swing the forearm up firmly against the
underside of the barrels. Apply pressure to the underside of the forearm until the
forearm latch snaps into its locked position (Fig. 4b).
The firearm is now fully assembled. With the firearm pointed in a safe direction,
open the firearm by moving the top lever fully to the right, and assist the barrel
swing with your off hand by pulling down on the forearm (Fig. 5).
(Fig. 3c)
(Fig. 4a)
RECEIVER
FOREARM PLATE
FOREARM
(Fig. 4b)
(Fig. 5)
TOP LEVER PUSHED
FULLY TO THE RIGHT CHAMBERS
67423 6/2/09 9:00 AM Page 5