Mossberg MVP FLEX - Manual (Page 4)

PART N0. 101484 REV. A 4
TO ATTACH BUTTSTOCK:
Before making any buttstock changes, move the safety button fully rearward
to the “ON” (SAFE) position and visually and physically check the chamber
and magazine to be certain the rifle is unloaded. Remove the bolt and
magazine (Fig. 1), and be sure to keep the muzzle pointed in a safe
direction.
Refer to your firearm’s owner’s manual for additional safety and
functional information.
Fig. 1
a) Lift the latch and turn it 90 degrees clockwise as shown in Fig. 2a. Push the
buttstock forward on the adapter (Fig. 2b) and strike the rear of the buttstock with an
open palm to fully seat it on the adapter.
OPEN LATCH
Fig. 2a Fig. 2b
b) Turn latch 90 degrees clockwise so tab is facing forward and will fit into
slot on buttstock (Fig. 3).
TAB
Fig. 3