MTI Wireless Edge MT-120018/E - Manual

base bracket
Qty: 1
Antenna/enclosure
Item: 1
Arm bracket
Qty: 1
x4 x4
1
AXIS
3
ELEVATION
2 4
x4
(MT-120018/A
ONLY)
ELEVATION
Verify that the oriantation of the hole
in item 1 is aligned with the elevation axis.
Use tightening torque of 5.7N/m.
1
2
using items2, 3, 13 as shown.
3
x4 x4 x4
AXIS
Attach item 1 to the back of the enclosure
For radio in 45
use this set of holes
13
Nut M5
Qty: 4
Item: 4
Washer spring M8
Qty: 4
Nut M8
Qty: 2
Wall/Poll bracket
Qty: 1
Washer flat M8
Qty: 4
Bolt M8x70
Qty: 2
Bolt M5x16
Qty: 4
MT-120018/A only
in item 1 is aligned with the elevation axis.
using items 2,3,4 as shown.
Verify that the oriantation of the hole
FOR MT-120018/E
Item: 5
Item: 6
Item: 7
Item: 8
Item: 9
Item: 10
Qty: 1
Clamping bracket
Item: 11
Item: 12
SHEET 1 OF2
Item: 13
BASE BRACKET INSTALLATION TO ANTENNA
INSTALLATION INSTRUCTIONS
Use tightening torque of 5.7N/m.
Attach item 1 to the back of the antenna
BASE BRACKET INSTALLATION
TO ENCLOSURE
RD41552800C/REV-B
Bolt M8x40
Qty: 4
Spring washer M5
Qty: 4
Item: 3
Flat washer M5
Qty: 4
Item:2