MTI Wireless Edge MT-120018/V - Manual

INSTALLATION INSTRUCTIONS
FOR 3490-257 (120018/V)
Item: 5
Item: 6
Item: 7
Item: 8
Item: 9
Item: 10
Clamping bracket
Qty: 1
Item: 11
Item: 12
Item: 13
SHEET 1 OF2
BASE BRACKET INSTALLATION TO ANTENNA
Attach item 1 to the back of the antenna
using items 2,3,4 as shown.
Verify that the oriantation of the hole
in item 1 is aligned with the elevation axis.
Use tightening torque of 5.7N/m.
BASE BRACKET INSTALLATION
TO ENCLOSURE
RD42233500C/A
Wall/Poll bracket
Qty: 1
Bolt M8x70
Qty: 2
Arm bracket
Qty: 1
Flat washer M5
Qty: 4
Item:2
Bolt M5x16
Qty: 4
120018/A only
1
ELEVATION
AXIS
2 3 4
x4 x4 x4 Spring washer M5
Qty: 4
Item: 3
Attach item 1 to the back of the enclosure
using items2, 3, 13 as shown.
Verify that the oriantation of the hole
in item 1 is aligned with the elevation axis.
Use tightening torque of 5.7N/m.
1
2 3
ELEVATION
AXIS
x4 x4 x4
(120018/A
ONLY)
For radio in 45
use this set of holes
13
Nut M8
Qty: 2
Antenna/enclosure
base bracket
Qty: 1
Item: 1
Washer flat M8
Qty: 4
Nut M5
Qty: 4
Item: 4
Bolt M8x40
Qty: 4
Washer spring M8
Qty: 4