Instructions for setup, Meta 2p – NEMO Equipment META 2 User Manual

Page 9

Advertising
background image

®

Insert Trekking Poles

Slide the handle of the trekking pole into the reinforced pocket at
the top of one door. Insert the trekking pole tip into the grommet
near the center of the door. Repeat with opposite side.

Stake Corners

Secure the corner anchors by pounding the stakes into the
ground with a rock or hard object. If the ground is too hard,
trap the stakes under a rock or another heavy object.

Connect Vestibules and Extend Trekking Poles

Connect the side release buckle to the webbing anchor and
extend the trekking pole upwards for maximum tension.
Repeat with opposite side.

Guy-out Tent and Vent

Stake the reflective side vent cords to promote airflow.
Adjust the tension on the side vents and vestibules to
ensure maximum water shedding and wind resistance.

Tension webbing strap straight out from the center of the door
making sure not to distort the bottom of the tent. Stake in place.
Repeat for webbing strap on opposite side of the tent.

Stake Webbing Straps

Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

©2010 NEMO Equipment, Inc.

1

2

3

4

5

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

META 2P

INSTRUCTIONS FOR SETUP

Advertising