Diasonic Tech DDR-5100 - Manual (Page 18)

REMOVING USB MASS STORAGE SAFELY.
(1) Windows ME, 2000, XP
WHEN THE SET REMOVE FROM CONNECTION, IT SHOULD DO IT
THRU PROPER PROCEDURE AS BELOW. IF NOT, IT MIGHT CAUSE
SERIOUS PROBLEM IN DATA.
1 CLOSE THE FILE TO OPEN.
LEFT CLICK “ “ BELOW THE WINDOW OF PC. IF SO, TOOL BAR AS BELOW
WILL APPEAR AND CLICK THE TOOL BAR.
OR RIGHT CLICK “ “ BELOW WINDOW WILL APPEAR, SO FOLLOW UP THE
DIRECTION.
CLICK “DDR-5100 UMS SYSTEM USB Device”.
WHEN BELOW TOOL BAR APPEAR, REMOVE THE SET FROM PC.
(2) Windows 98SE
REMOVE IT FROM PC WITHOUT ANY PROCEDURE. AS Windows ME, 2000, XP.
4 WHEN IT IS COMPLETED, BELOW POP-UP WILL APPEAR. CLICK YES”
CLICK FOR REBOOTING THE COMPUTER.
AFTER REBOOTING, CONNECT THE SET & PC THRU USB CABLE. BELOW
WINDOW WILL APPEAR.
7 EVERYTHING IS SUCCEED, ITCAN BE APPEARED AT SYSTEM PROPERTIES.