P.I. Engineering XKE-128 Keypad - Manual

XKE-128 Programmable Keyboard
Product Manual
Model XK-1225-UFK128-R
128 Keys
Individual Key Backlighting
Designed, Sold, and Supported in USA
From P.I Engineering, The No Slogan Company
www.xkeys.com
Box Contents
This package contains:
1- X-keys XKE-128
1- Installation CD
1- Double key set (2 tall, 1 wide, 1 key puller)
4- Legend Sheets (two pre-printed, two blank)
1- Product Manual
Quick Start for Windows
1.
Run the MacroWorks (MW3.1) installation program from the enclosed disc.
2.
Plug in the X-keys and wait for Windows to recognize it.
3.
Click on the MW3.1 taskbar icon and select the XKE-128 to open the MW3.1
programming window
4. Press any key on the X-keys (or double-click on the key image) to begin
recording a macro.
5. Type text or select keystrokes, shortcut, or function. Multiple lines of
keystrokes, text, shortcuts, and functions may be entered on a single key.
6.
Press the key again (or click Save) to complete programming.
7.
When finished,
click the red “X” in the upper right corner to close the
programming window.
To quickly learn how to use MW3.1 watch the brief tutorials on the disc or on
our website. Consult the MW3.1 help file for complete instructions and tips on
programming and using your X-keys.
Mac Users
Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.