ParkZone PKZ3400 - Manual (Page 20)

18
5. Slide the new prop shaft back into the gear box.
6. Place the nylon nut on the back of the prop shaft. Spin the prop
and spur gear in a counter-clockwise direction. The nylon nut will
thread onto the prop shaft.
7. While holding the nylon nut in place, gently turn the spur gear
counter-clockwise to ensure the nut is snug.
Transmitter Dual Rate Function
The ParkZone 4+ channel 2.4GHz DSM2 transmitter included with the
Ember 2 features dual rate capability. The default setting is high rate. To
access the low rate function, simply press IN on the right gimbal. The
LED light on the transmitter face will begin to blink, alerting you that the
transmitter is on low rate. To return to high rate, simply push in again on
the right gimbal.
Increasing control throws
As you become more comfortable with flying the Ember 2, you may wish
to increase the control throws for even more maneuverability.
To increase the control throw, gently remove the pushrod from the control
horn. It is recommended to increase control throw by installing the push-
rod in closer to the surface one hole position at a time until you reach the
desired control throw.