Parr Instrument 6300 - Manual (Page 57)

M
ENU
O
PERATING
I
NSTRUCTIONS
6300
A
w w w . p a r r i n s t . c o m 57
Date & Time:
Accesses a sub-menu to set the current date and time.
Date. • Displays current date and accesses sub-
menu on which date is set in (YY/MM/DD)
format.
Time. • Displays current time and accesses sub-
menu on which time is set in (HH:MM) format.
Time Zone. • Displays the selected time zone in
relation to Greenwich Mean Time. Pressing this
key will step through the time zones and auto-
matically adjust the time setting.
Volume Level Adjust:
Opens a window with a slide adjustment to set the
volume of the key cliks and alarms of the calorimeter.
Default is 85%.
Software and Hardware Info:
This screen displays important information such
as the main software version, I/O board hardware
information, CPU type, I/O firmware revision, and
Controller IP address.
Settings Protect:
Provides protection for the program options and set-
tings on the menus. If this is turned ON, the user will
be warned that enumeration keys are locked when a
key is pressed. Enumeration Keys either toggle a value
(ON/OFF) or select from a predefined list. This feature
is used primarily to protect the instrument settings from
accidental changes if one were to inadvertently touch or
bump up against the touchscreen.
“Other” Multiplier:
Press this key to display the Other Multiplier dialog
box, where the user can enter a final multiplier to be
used when the reporting units are set to “Other”.
Calibrate Touchscreen:
This key prompts the user to touch the screen at pre-
defined points in order to facilitate touch screen calibra-
tion. It is important that a touch screen stylus, rather
than a finger, be used in order to realize an accurate
calibration.
LCD Backlight Timeout:
The unit is equipped with an automatic circuit to shut
off the backlight when it is not being used. The back
light will shut off if there is no keyboard activity for
the number of seconds entered. Pressing any key will
automatically turn the back lighting ON. A setting of 0
will keep the backlight ON at all times.
LCD Backlight Intensity:
This key accesses a sub-menu with a slide control which
adjusts the brightness on the LCD display for optimum
viewing.
Print Error Messages:
When turned ON, all error messages will be printed on
the printer as well as displayed on the screen. When
turned OFF, messages will only display on the screen.
Language:
Steps the Calorimeter through the installed operating
languages.
P
ROGRAM
I
NFORMATION AND
C
ONTROL
M
ENU