Parr Instrument 6200 User Manual
Parr Instrument Measuring instruments
Advertising
Table of contents
Document Outline
- Preface
- Concept of Operation
- Installation
- Instrument Description
- Program Installation & Control
- Operating Instructions
- Operating the 1108P Oxygen Combustion Vessel
- Operating the Filling Connection
- Operating the Calorimeter
- Samples and Sample Holders
- Combustion Aids
- Oxygen Charging Pressure
- Combustion Capsules
- Foodstuffs and Cellulosic Materials
- Coarse Samples
- Corrosive Samples
- Explosives and High Energy Fuels
- Volatile Sample Holders
- Poor Combustion
- Chapter 6
- Corrections & Final Reports
- Reporting Instructions
- File Management
- Maintenance & Troubleshooting
- Menu Operating Instructions
- Calculations
- Calculating the Heat of Combustion
- General Calculations
- Thermochemical Corrections
- ASTM and ISO Methods Differ
- Thermochemical Calculation Details
- Acid and Sulfur Corrections
- ASTM Treatment for Acid and Sulfur
- ISO Calculations
- Spiking Samples
- Conversion to Other Moisture Bases
- Conversion to Net Heat of Combustion
- Appendix C
- Standardization
- Communications Interfaces
- Technical Service
- Parts Lists & Drawings
- Principal Assemblies in Calorimeter
- Parts List for A1279DD2 Controller Assembly
- Parts List for Temperature Control Assembly
- Parts List for A1284DD2 Stirrer Hub Assembly
- Parts List for Water Tank Assembly
- Parts List for Cooling Water Supply
- Parts List for Oxygen Filling System
- Part List for 6200 Stirrer Motor and Drive
- Spare and Installation Parts List*
- Table 4-1
- Figure 2-1
- Swagelok Tube Fittings
- 6200 Calorimeter Back Panel
- Closed Loop Configuration with 6510
- Open Loop Configuration with Tap Water
- Open Loop Configuration with 1552
- Combustion Capsule with Adhesive Tape Seal
- 6200 Isoperibol Calorimeter Cutaway Front
- 6200 Isoperibol Calorimeter Cutaway Rear
- A1279DD2 Control Schematic
- Oxygen Solenoid Assembly & Fittings
- Water Tank Assembly
- A1311DD Circulating Pump Assembly
- Temperature Control Assembly with Fittings
- A1284DD2 Stirrer Hub Assembly
- Stirrer Motor Assembly