Parr Instrument 5500 HPCL - Manual

1
CAUTION: DISCONNECT ALL ELECTRICAL CONNECTIONS BEFORE
PROCEEDING WITH DISASSEMBLY AND ASSEMBLY
1. Disconnect the 1/50HP motor from the existing magnetic drive assembly by unscrewing the
upper cover (2982HC) from the end cap (2717HC2) as shown in Picture 1.
2. Loosen set screw in drive adapter (2938HC) and remove the drive adapter from the motor
shaft. Set the motor aside.
3. Remove the stirrer shaft from existing magnetic drive assembly
4. Remove the magnetic drive assembly from the reactor head using a 264AC4 spanner wrench.
5. Some external fittings may need to be removed for easier removal of the magnetic drive
assembly.
444M
ASSEMBLY INSTRUCTIONS FOR
5500 RETRO-FIT
2982HC
Upper Cover
2938HC
Drive Adapter
2717HC2
End Cap
Existing
Motor
Existing Magnetic
Drive Assembly
Picture 1