Peachtree Audio DAiT - Manual (Page 10)

USB Connections
PC
Connect the USB terminal on the DAC•iT to a USB connection on your
computer.
Your computer will “see” the USB Audio DAC inside the DAC•iT. You may get a
“Peachtree Audio 24/96” pop-up box but it’s not necessary.
Right click the speaker icon on the bottom of your screen.
Select “Audio” tab.
Using the drop-down box choose Peachtree Audio 24/96.
Click OK.
Launch Music Program and play.
Mac
Open System Preferences.
Click on Sound.
In the Output tab you should see Peachtree Audio 24/96 as one of the choices.
Select it.
Launch iTunes and enjoy your music.
Once you set up your computer following the above instructions it should
recognize the DAC•iT’s USB Audio DAC and default to it. If you unplug the USB
connection you may have to repeat some steps; this is not unusual.
1)
2)
3)
4)
5)
6)
7)
1)
2)
3)
4)
At Peachtree Audio we think products should be easy to use.
We don’t require any custom USB drivers or software programs
to listen to music from your computer. The DAC•iT’s USB digital
input accepts music fi les from your computer’s hard drive and
plays them back with superb fi delity.
Useful
T
ips
8