Peachtree Audio Grand Integrated - Manual (Page 12)

Remote
9
Grand Integrated
1
2
3
4
5
6
7
8
9
10
12
11
STANDBY MUTE
UP
VOLUME
PHASE
DOWN
TUBE
USB COAX1 COAX2 OPT1
OPT2 BNC AUX1/HT AUX2
 On/Standby: Puts the Grand Integrated in or out of “Standby”.
 VOL - / VOL +: Reduce or increase volume level.
 Phase switch: When engaged, the Grand Integrated will operate 180 degrees out of phase.
An led will appear on the front panel. When it is not engaged, led off, the Grand Integrated is
LQSKDVH 6HHIURQWSDQHOGHVFULSWLRQIRUPRUHLQIRUPDWLRQ
 COAX1 & COAX2: Selects a source connected to a coaxial digital input.
 USB: Selects a digital audio source connected to the USB input.
 BNC: Selects a digital source connected to the BNC input.
 OPT2: Selects a digital source connected to the Optical2 input.
 Mute: Mutes or Un-Mutes the output of the Grand Integrated.
TUBE: Switches between solid state or tube-hybrid operation of the Grand Integrated. An amber
LED will illuminate in the front panel tube window when in tube-hybrid mode.
 OPT1: Selects a digital source connected to the Optical1 input.
 AUX2: Selects an analog source connected to the Aux 2 input on the back panel.
 AUX1: Selects an analog source connected to the Aux 1 input on the back panel. It will also
engage Home Theater bypass mode if it has been selected on the back panel. (See back
SDQHOSDJH
*If you inadvertently lose your remote while in “Mute”, you can turn the Grand Integrated off from the
back panel for a few seconds, then turn it back on to re-set and use the volume control manually until
the remote is found.