Peachtree Audio Grand Integrated X-1 - Manual (Page 11)

Remote
9
1
2
3
4
5
6
7
8
9
10
12
11
STANDBY MUTE
UP
VOLUME
PHASE
DOWN
TUBE
USB COAX1 COAX2 OPT1
OPT2 BNC AUX1/HT AUX2
1) on/Standby: Puts the Grand Integratedx1 in or out of “Standby”.
2) VoL - / VoL +: Reduce or increase volume level.
3) phase Switch: When engaged, the Grand Integratedx1 will operate 180 degrees
out of phase. An led will appear on the front panel. When it is not engaged, led off,
the Grand Integratedx1 is in phase. See front panel description for more information.
4) coaX1 & coaX2: Selects a source connected to a coaxial digital input.
5) uSB: Selects a digital audio source connected to the USB input.
6) Bnc: Selects a digital source connected to the BNC input.
7) opt2: Selects a digital source connected to the OPT2 input.
8) mute: Mutes or Un-Mutes the output of the Grand Integratedx1.
9) tuBe: Switches between solid state or tube-hybrid operation of the Grand
Integratedx1. An amber LED will illuminate in the front panel tube window when
in tube-hybrid mode.
10) opt1: Selects a digital source connected to the OPT1 input.
11) auX2: Selects an analog source connected to the AUX2 input on the back panel.
12) auX1: Selects an analog source connected to the AUX1 input on the back panel.
It will also engage Home Theater bypass mode if it has been selected on the back
panel. See page 5.
*If you inadvertently lose your remote while in “Mute”, you can turn the Grand Integratedx1 off from
the back panel for a few seconds, then turn it back on to re-set and use the volume control manually
until the remote is found.
Grand Integrated
X1