Peachtree Audio nova220SE - Manual (Page 8)

1 2 3 4 5 8 9 6 7
Standby Button: After plugging in the AC cord and switching the POWER
ON the back panel, this button toggles the unit between On mode which
USB Button
driver on the PC.
COAX Button: This selects the coaxial digital audio input and lights the button
OPT1 & 2 Buttons: These select the Optical 1 or Optical 2 digital audio
inputs and light the corresponding button blue. Note: these inputs are
AUX Button: This selects the analog audio input and lights the button blue.
Note: when using a turntable please be sure it has a built-in or connected
line-level signal into the unit.
IR Receiver Window: Allows the infrared commands from the remote to
control the unit. For best results please ensure an unobstructed line-of-sight
between the top side of the remote control (this is where the IR transmitter is
Tube Window: Displays the installed tube and lights blue when the tube is
engaged. Notes: when disengaged, the tube is completely removed from the
audio signal path. The amber back-lighting in the tube window will be present
whenever the product is on. The blue lighting indicates the engaged/disengaged
status of the tube buffer.
Volume Knob:: Rotate clockwise to increase and counter-clockwise to decrease
output level. Note: the volume knob is motorized and rotates when the volume
up or down buttons are pressed on the remote control. The knob also has a
dimple to more easily indicate the current setting from a distance.
Headphone Output: Accepts 1/4” headphone connections. Inserting a head-
B
C
D
E
F
G
H
I
J
Front Panel