Peachtree Audio Peachtree220 - Manual (Page 7)

220
Front and Back Panels
5
1 2 3 4 5
7
8
6
115V 230V
AC~50/60Hz
AC INPUT
VOLTAGE SELECTOR
RCA INPUT
R L
TRIGGER
12V
Type: Integrated Amplifier
Model: peachtree 220
Max Power Consumption: W 1200
Fuse Rating: 115V-T AL 12.5
230V-T AL 6.3
Designed in USA
Made in China
SERIAL NO
BALANCED XLR INPUT R L
POWER
ON OFF
XLR
RCA
RCA /XLR
SELECT
1) 12V trigger: Enables automatic turn on and off from-or-to another source
with the same feature.
2) XLr input: Balanced input for the variable balanced XLR output of a preamplifier.
3) rca input: Single ended input for the single ended RCA variable output of
a preamplifier.
4) rca/XLr Select: Choose either #2 or #3 above as your preferred input.
5) Speaker terminals: Marked + for positive and – for negative.
6) Voltage Switching: For international use. Unplug the Peachtree220 before you make the
switch and be sure to use the proper fuse for the voltage chosen. **WARNING** Improper
voltage setting may cause damage to the Peachtree220.
7) ac power cord attachment & fuse: The three prong power cord is included in
the Peachtree220 box. It is user replaceable after turning the Peachtree220 off.
You may call your dealer or Peachtree Audio’s service department with any
questions regarding fuse replacement. **WARNING** using the wrong value fuse
may cause damage to the Peachtree220.
8) power on/off Switch
1
1) Standby Switch: After turning the Peachtree220 on with the AC Power switch on
the back panel, this button will allow you to switch between “on” (blue light) and
“standby” (green light) . Standby draws very little power so we suggest leaving the
amplifier on from the back panel and using this switch for daily operations.