Peg-Perego Prima Pappa Best - Manual (Page 10)

- 10 -
7 The high chair has a double tray. The top
tray can easily be washed in a dishwasher.
To remove it, detach it from the lower tray
and lift it up (fig_a). To fix the tray on the rear
supports of the high chair, align and engage
it with the attachments provided (fig_b).
When the high chair is closed, the tray cannot
be attached to the rear supports.
8 FIVE POINT SAFETY HARNESS: to close it, insert
the two waist strap buckles (with attached
shoulder straps) into the crotch strap until they
click into position (fig_a). To release it, press
the two sides of the buckles and at the same
time pull the waist strap outwards (fig_b). To
tighten the waist strap pull from both sides in
the direction of the arrow (fig_c), to loosen do
the opposite. The waist strap can be tightened
up to the safety stop (fig_d).
9 The shoulder straps can be adjusted to two
different heights. Unfasten the safety belt
from behind the backrest by pushing the
buckle downwards (fig_a) and unthread the
strap from the cover (fig_b). Insert the strap
buckle into the other slot in the backrest
(fig_c) and reattach the buckle, pulling the
strap until it clicks into position (fig_d).
10 ADJUSTING HEIGHT: the high chair can be
set at 7 different heights. To raise it, take hold
below the tray and pull upwards (fig_a). To
lower it, press the two side buttons at the
same time and move to the required height
(fig_b). This can also be carried out with the
child in the high chair.
11 RECLINING BACKREST. The high chair can be
reclined in four positions: for eating, playing,
resting, or sleep. To adjust it, raise the handle
behind the backrest (fig_a) and lock in the
required position (fig_b). This can also be
carried out with the child in the high chair.
12 CLOSING AND REOPENING THE TRAY: to close
the tray, pull it to the third position indicated
with the red markings (fig_a), push down
button 1 (fig_b), push down button 2 (fig_c),
and at the same time rotate the tray upwards
until it locks (fig_d). To reopen the tray, push
down button 2, rotate the tray downwards
and set it in the first or second position.
13 FOLDING: before folding up the high chair,
close the tray, move the backrest to the upright
position, lower the seat to the lowest position,
and close the footrest. To fold up the high chair,
release the safety device by turning it in the
direction of the arrow and then press the pedal
(fig_a). At the same time take hold of the seat
and fold it by pulling it upwards (fig_b). The
high chair is freestanding when folded up.
14 REMOVING THE COVERS: to remove the high
chair covers, unthread the harness straps
from the backrest (fig_a) and from the seat
(fig_b). Fully recline the seat to unbutton the
covers from the sides of the backrest (fig_c),
unbutton from the inside of the armrests, and
slide the cover upwards to remove it.
15 PACKING POSITION: in order to return the high
chair to its “packing position” (for transport
purposes, or to put it back into its box), proceed
as follows (a small screwdriver is required).
Remove the tray, move the backrest into the
upright position, lower the seat to the lowest
position, and close the footrest. Press the side
button (fig_a), at the same time inserting the
screwdriver into the slot, and push towards the
right (fig_b). Repeat the same operation on
the other side (fig_c), pushing the screwdriver
towards the left (fig_d) and lower the seat to
the bottom (the non-usable position). Then fold
up the high chair and put it into its box.
SERIAL NUMBERS
16 The information about the date of production
of PRIMA PAPPA BEST is indicated under the
seat.
_ Product name, date of manufacture and serial
number of the product.
This information is essential in the event of
any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight
may give rise to colour changes of various
different materials; store this product in a dry
place.
CLEANING THE CHASSIS: periodically clean all
plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep
all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of
dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE SACK: Wash with a damp cloth
and neutral detergent. Do not wring. Do not
use chlorine bleach. Do not iron. Do not dry
clean. Do not use solvents for stain removal.
Do not spin dry.
PEG-PÉREGO S.p.A.
Peg Pérego can make changes at any time to
the models described in this publication for
technical or commercial reasons.
PEG-PÉREGO AFTER-SALES
SERVICE
If any parts of your Peg Pérego product
should be accidentally mislaid or damaged,
use exclusively genuine original Peg Pérego
replacements. For any repairs, replacements,