Peg-Perego Viaggio HBB 120 - Manual (Page 22)

22
1. Make sure that
your child is sitting
comfortable in the
booster seat, with the
back fully against the
backrest of the booster
seat. Pull the vehicle belt
and make sure that the
lap portion of it passes
below both armrests.
2. Buckle the belt (an
audible click is heard)
and make sure that both
lap and shoulder belts
pass below the armrest
located next to the
seatbelt buckle. Pull on
both lap and shoulder
belts making sure that
they are not tangled
anywhere.
Securing the child in the booster seat Securing the child in the booster seat
3. Thread the shoulder belt in the red router located
below the headrest. To do this slide the belt from
outside toward the center of the product. Check that
the belt is not twisted when doing this operation.