Pitney Bowes DM575 Series - Manual (Page 16)

1 • Read This First
1 - 6 SV62201 Rev. C
Your DM Series™ Digital Mailing System is designed to remain powered on
at all times. This is necessary so that the printer station can perform the
required maintenance it needs to maintain peak performance.
Your DM Series™ System has a power switch (for the location, refer to
Chapter 2, page 2-6) so that you can properly remove power to the system.
If you need to power off your system, you must use the power switch.
When you power off the system, the system immediately moves the print-
head back to the capping station to keep the printhead from drying out.
Powering off your system by any other means, such as a wall switch, a
power strip, or unplugging from a wall outlet, will result in higher than nor-
mal ink consumption and could damage your mailing system.
Important Information About Powering Your

DM Series™ Digital Mailing System Off
NO NO
YES
OFF
ON