Pitney Bowes DM875 Series - Manual (Page 39)

DM825™ and DM875™Series Digital Mailing System Operating Guide
SV62200 Rev. C 4-3
Applying
Postage and
Running Mail To apply postage and run mail on the DM825™and DM875™ Series Sys-
tem, follow the procedures listed here.
You must follow procedures 1 and 2 before you run mail through the sys-
tem and apply postage. If you are using Accounting, you must also follow
procedure 4.
Follow the other procedures listed here as needed.
For details on each procedure, refer to the section number listed here.
Determining the Correct Postage Mode. Deciding the appropriate mode for
your specific mail run.
Preparing Your Mail. Getting your mail ready for the DM825™and
DM875™ Series Digital Mailing System.
Selecting the Postage Mode and Running Mail. Choosing the mode for
running your mail and tapes.
Selecting or Deselecting an Account to Print Postage. Refer to this sec-
tion if your system uses accounting.
Selecting the Class. Refer to this section if you need to specify a class or
select a special service.
Selecting Meter Stamp Options. This section describes how to change the
elements printed on your piece of mail.
Using Electronic Confirmation Services. This section tells you how to use
preprinted barcode labels provided by Pitney Bowes to electronically process
and submit records for USPS Confirmation Services to the Pitney Bowes
Data Center.
Adding Postage or Changing the Date. This sections tells you how to add
more postage or change the date of your postage.
Clearing the Batch Count. Refer to this section if you want to clear or reset
the number of pieces of mail processed by your system.
1
2
3
4
5
6
7
8
9