PocketBook SURFpad 4 L User Manual

Page 13

Advertising
background image

GETTING STARTED

13

ESTABLISHING WI-FI

If you skipped Wi-Fi configuration during the initial setup, you can con-

figure it later.

1.

Go to

Settings > Wireless & networks

. Check Wi-Fi checkbox

2.

To see the list of available networks open Wi-Fi section.

3.

The Device automatically detects security type, and if there’s no need

to specify additional data (e.g. pre-shared key), connection would be

established.

4.

Otherwise, you need to specify password and other security settings

(if required) manually.

You can read about advanced network configuration in the Wi-Fi Con-

nection chapter of the current User Manual.

INSERTING MICRO SD CARD

The Device has 16 GB of internal storage, but you can extend it by using

micro SD card.

Insert it to the slot,
like it shown on a

figure, and slightly

push until card will
be fixed.

ATTENTION!

Before

ejecting microSD card
either turn the Device off
or unmount it: go to

Set-

tings > Storage settings > Unmount SD card

. Otherwise the data stored on microSD

card might be damaged.

To eject the card, slightly press on its edge until it will be unfixed, and

pull it to get.

ATTENTION!

If your SD card or SIM card get stuck, do not try to eject it by your-

self, and immediately call Customer Support.

Advertising