PocketBook SURFpad 2 - Manual (Page 41)

FIRMWARE UPDATE
41
2. Connect your Device to PC and copy firmware file (.upkg exten-
sion) to the internal storage or external microSD-card
3. Go to Settings > About device > System updates section
4. Select SD card . In the list appeared select the firmware version to
install and press OK .
Variant 2
1. Download to your PC firmware version you’d like to install
2. Connect your Device to PC and copy firmware file (.upkg exten-
sion) to an external microSD-card
ATTENTION! In this variant you can install firmware from external card only !
3. If the Device is on, turn it off by continuous power button press
and selecting the corresponding choice in switch off menu
4. Press and hold Volume + button and switch the Device on by
pressing power button
5. Android system recovery menu will appear (Android logo). Now you
can release Volume + button
6. Select apply update from sdcard using Volume +/- hardware keys
and press On/Off key to confirm choice
7. Select the firmware file by Volume +/- buttons and press On/Off
button to confirm.
8. The Device will perform all the necessary update action and will reboot.
NOTE To exit Android system recovery , select reboot system now .
Variant 3
1. Download to your PC firmware version you’d like to install
2. Connect your Device to PC and copy firmware file (.upkg exten-
sion) to an external microSD-card
ATTENTION! In this variant you can install firmware from external card only !
3. Go to Settings > Backup & reset > Recovery Mode section.
4. The Device will reboot and Firmware update will continue ac-
cording to the Variant 2 scenario, starting from 5th item .