PocketBook A 10 User Manual
Page 21
GETTING STARTED
20
At first, you need to install your network op-
erator SIM card as it shown on a figure.
ATTENTION!
To avoid damage to the SIM card,
it is recommended to turn off the device before
inserting or removing the SIM card.
In case if the card is protected with PIN code, the Device will
ask you to enter it from on-screen keyboard. PIN-code request
settings can be changed in Settings > Location & security > Lock
SIM card > Set up SIM card lock. In this section you can set
whether request or not PIN-code when you are unlocking the
screen, also you can change the SIM card PIN code.
NOTE
In case when Lock SIM card parameter is on, you will be asked for PIN
every time when you’re unlocking the screen.
Usually mobile network operators pre-configure connection
settings (such as APN) on a SIM card, so the Device will con-
nect to the network automatically.
ATTENTION!
If the Device is connected to Wi-Fi network, it will have higher
priority for data transfer.