Qsonix iPad/iPhone Addendum - Manual (Page 6)

6
Getting Started
It’s very easy to setup you iPhone to control your Qsonix device using the
Qsonix auto-discovery mechanism which utilizes your Qsonix serial
number to locate your local network address.
By My.Qsonix.com: We have also provided an easy way to access your
system using the Qsonix serial number. This will locate your system
automatically by associating its serial number with your current local IP
address, this is especially useful if your Qsonix is setup using a dynamic
(DHCP) IP address.
1. After gathering the serial number from the information page
in the system tools open Safari on your IPhone.
2. Select the bookmarks icon to create a Qsonix bookmark.
3. Once finished touch the edit button and select the Qsonix
bookmark you just created. Clear out the URL field and enter
the following information.
http://my.qsonix.com/YourSerialNumber
example:http://my.qsonix.com/245938.
4. When completed return to your bookmarks and click done.
5. You can also add this shortcut to your device home page
using the built-in ‚Add to Home Page‛ feature of the Safari
browser. ****
Now when ever you select this bookmark it will actively locate your
Qsonix by its serial number. You will notice that you are redirected to
the machine regardless of its IP address. This type of setup is extremely
useful for a DCHP network which may have changing IP addresses.
Starting the Qsonix iPhone Remote
Using the shortcut that you created
above, you can now activate the
remote control features by simply
tapping on the appropriate Qsonix shortcut. This will open the safari browser and take
you to the ‚Home‛ Page of the remote control interface where you can access all of the
available features.