Qsonix QJB110 - Manual (Page 15)

19
Loading Your CD Library
In order to begin using your Jukebox system, you will first need to create a CD library by Loading your CDs into the
system. The Qsonix system has been designed to make this a very simple and automated process. Grab a handful of
at least four to five commercial CDs to load into the system and be sure that your Internet connection is available to the
Jukebox system.
Automatic Loading CDs (Most Commercial CDs)
Step 1
Open the Qsonix Jukebox disk drive using the open button
located on the door panel below the touchscreen. (Refer to
Front Door diagram on page 10.)
Step 2
Insert the CD into the CD tray. The system reads the coded
information on the disk and displays information about the
disk on the screen. Depending on your Network
connection this may take 30-60 seconds to complete.
Step 3
Confirm that the CD information displayed matches your
CD in the tray. You may also be offered the opportunity to
“Choose Another Match” which will allow you to select from
multiple possible selections. Follow the on-screen
instructions and select the match that best correlates to
the CD you are trying to load.