Raloy RF117HD User Manual
Page 12
12
1 (866) 395-5927
1.10 Connecting the RF117HD to Your Server
1.10.1 RF117HD Connection to USB/DVI-D server via RCX-6 Cable (included with console)
Use RCX-6 to connect to a USB/DVI-D server
Figure 7. Example of connecting RCX-6 DVI console cable to server via USB/DVI-D interface
1.10.2 RF117HD Connection to External USB/DVI-D KVM via RCX-6 Cable (included with console)
Use RCX-6 to connect to an external USB/DVI-D KVM
Figure 8. Example of connecting RCX-6 DVI console cable to external KVM via USB/DVI-D interface
Remarks:
The above connections are for the LCD keyboard only, without the integrated KVM switch.
For the LCD keyboard drawer with built-in KVM switch, please refer to the accompanying KVM switch
user manual.
Caution:
The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered
on may cause irreversible damage to the servers, KVM and LCD keyboard drawer. Before attempting to connect
anything to the LCD keyboard drawer, we suggest turning off the power to all devices before connecting them.
Apply power to connected devices again only after the LCD keyboard is receiving power. The company, supplier
and/or manufacturer is not responsible for damages caused in this way.